
Add to Cart
Stock Product Status Multi-linear Laser Omnidirectional
Autoscanning Handheld Barcode Scanner
1. Fail to read barcodes. A. Some barcode types don’t set to be read as factory default. Please check whether you enable this function. B. The barcode is not correct. Please generate a new barcode. C. There’s direct sunlight on the barcode and the photoreceptor becomes saturate. Please avoid direct sunlight. D. There’s transparent material covered on the barcode. The high reflectance will influence the decoding performance. E. Hardware failure: defective engine board. |
2. Can read barcodes, but can’t upload data. A. Please check whether the cable is connected well. B. Please check whether the settings of PC port and serial scanning are the same. C. If it is wireless barcode scanner, please check if it is paired well with the computer. |
3. There’s no electricity of the barcode scanner. A. PC insufficient electricity supply or external power source failure. B. Hardware failure: defective cable or mainboard. |
4. Wireless barcode scanner pairs successfully, but can’t upload data. Please reset factory default. Scan ‘factory default’ and ‘serial mode’. |
Type of illuminant | 650(Visible Laser ) |
Scan Rate: | 1120 scans/second |
Reading preciseness | 5mil |
Interface : | PS2 ,Rs232,USB |
Print Contrast: | 30%min |
Barcode types: | 1D barcode |
Safety performance | Accord with nationallevel 1 laser safety standards level 1 standards |
EMC | FCC part 15 Class BEuropean Union EMC directive |
Scan of depth | 5mil 25mm~50mm 7.8mil 0mm~150mm 10.4mil 0mm~175mm 13mil 0mm~215mm 26mil 25mm~250mm |